Blind Rivets for Riveter
CODE 615236-615247
CODE 615236-615247
Blind Rivets for Riveter
High strength,precision-made hollow rivets assembled on a solid mandrel. They ares pecially useful for “blind” fastening where no access to the reverse side is available. Rivets are made in various sizes with head styles in aluminium, steel, monel, copper and stainless steel. Two types of standard rivets, open and closed, are available but the most common open type is described below.
Standard Open Type
Standard open type rivet is a hollow rivet, pre-assembled on to a headed pin or mandrel. The mandrel is designed to fracture at a pre-determined point during the setting operation, when the lamination forming the structure being fastened,have been drawn closely together and the whole join is tight. Normally on the vessel the rivet of aluminium alloy body and steel mandrel are used. Unless otherwise specified the aluminium alloy body and steel mandrel type will be supplied. Please specify diameter and length in mm when ordering.
CODE | Rivet Dia mm D | Length mm L | Required Hole dia mm | Rivetting Range mm | Pcs in Pkt |
6152 36 | 2.4 | 5.7 | 2.5 | 1.0- 3.2 | 100 |
6152 37 | 3.2 | 4.4 | 3.3 | 1.0-1.6 | 100 |
38 | 3.2 | 6.3 | 3.3 | 1.6-3.2 | 100 |
39 | 3.2 | 8.0 | 3.3 | 3.2-4.8 | 100 |
40 | 3.2 | 9.8 | 3.3 | 4.8-6.4 | 100 |
6152 41 | 4.0 | 6.9 | 4.1 | 1.2-3.2 | 100 |
42 | 4.0 | 8.6 | 4.1 | 3.2-4.8 | 100 |
43 | 4.0 | 10.4 | 4.1 | 4.8-6.4 | 50 |
44 | 4.0 | 14.0 | 4.1 | 6.4-9.6 | 50 |
6152 45 | 4.8 | 7.5 | 4.9 | 1.6-3.2 | 50 |
47 | 4.8 | 11.1 | 4.9 | 4.8- 6.4 | 50 |