Brush 51

Wire Cup Brush

CODE 510761-510787



1.Designed for high speed operation on pneumatic or electric scaling and sanding machines.

2.These brushes remove rust and scale from metal, clean tanks and boat hulls, take off old paint, and clean castings and structural metal.
3.Threaded nut type and welded shaft types are available.
4.When ordering, please specify the type of fitting required on the cup brush and the inner diameter of the bolt fitting.

Whenever ordering wire brushes be certain that they will not be used on machines with speeds higher than the maximum safety speed shown for the brush.

CODETypeCup(Wheel ) O.D.mm*Arbor(Inch)Thickness
510761Standed Cup  75×5/825mm
510762100×5/830mm
51076202100mm×M14X2
510763150×7/840mm
510766Knot Type Cup75×5/825mm
51076601WIRE CUP BRUSH KNOT TYPE,75mm × M14×2
51076602WIRE CUP BRUSH KNOT TYPE Twisted style 75mm × M10 × 1.5
510767100×5/830mm
510768150×7/840mm
510771Standare Wheel75*3/815mm
510772100*5/817mm

Brush Wire Wheel Standare 100mm×3/8 (different size, same #)
510773125*1/217mm
510774150*3/425mm
51077401Brush Wire Wheel Standare 150mm×3/4 (different size, same #)
510775200*3/425mm
510776250*125mm
510777300*125mm
510785Wire Cup Brush Crimped Threaded Nut; Type 75 × M10 Thread
51078501Wire Cup Brush Crimped Threaded Nut; Type 100 × M14 Thread
510786Wire wheel brush standard on shaft - 50mm x arbor 6mm
510787CRIMPED WIRE CUP BRUSH STEEL 50mm with shank 6mm
51078701Wire Wheel Brush, Shaft Welded Type, Cup Shape, OD 50 mm With 6 mm Arbor


Label: 175
Home
Product
Costomize
Contact